We have changed the wheels on our EVO-X and gone to an 18×10 +25 XXR 521 wheel wrapped in 255/40/18 tires. To achieve caliper clearance on the front we needed about 23 mm of spacer to clear the brembo brakes. We placed an order for H&R Trak wheel spacers in 25mm width. These spacers are not listed [...]
Archive for the ‘Installations’ Category
EVO-X H&R Trak Spacers 25mm and XXR 521 Wheels Install
Posted: 9th August 2010 by admin in Installations, Wheels & TiresTags: 25mm Wheel Spacers, EVO 10, EVO-X, H&R Trak Spacers, Mitsubishi EVO, Wheel Spacers, XXR 521, XXR Wheels
0
EVO-X Carbon Fiber Fenders Installation
Posted: 10th May 2010 by admin in InstallationsTags: Carbon Fiber, EVO, EVO 10, EVO-X, Fenders, Installations
June 13, 2008
Product: 08+ Mitsubishi Evolution-X Carbon Fiber Fenders (Pair)
We have completed test fitment on the new 2008+ Mitsubishi EVO-X Carbon Fiber Fenders by Racing Elegance. We have photographed the installation process to share with our readers and customers so they can see what is involved in installing this product on an EVO X.
Tools Needed: 10mm [...]
EVO-X ETS Intercooler Kit Upgrade Install
Posted: 10th May 2010 by admin in InstallationsTags: ETS, EVO, EVO 10, EVO-X, EVO-X Intercooler, Extreme Turbo Sysytems, Installs, Intercooler, Intercooler Pipes
July 13, 2008
Product: 08+ Mitsubishi Evolution-X ETS Intercooler Upgrade Kit
ETS Intercooler and piping upgrade installation.
Before you are ready to start installing the new parts you will want to lay out your new parts on a blanket or work table so that you can inventory all of the components that make up the kit. (Our pictures [...]
EVO-X Agency Power Suction Pipe Install
Posted: 29th April 2010 by admin in InstallationsTags: Agency Power, EVO, EVO 10, EVO-X, Suction Pipe, Turbo Inlet Pipe
July 2, 2008
Product: 08+ Mitsubishi Evolution-X Agency Power Turbo Suction Pipe Kit
We installed the first suction pipe we received from Agency Power today and are pleased with the fitment, product quality, and finished result. This pipe works in conjunction with the Agency Power Air Intake Kit by replacing the stock rubber tube connecting the mass [...]
EVO-X Carbon Fiber Rear Bumper Diffuser Installation
Posted: 29th April 2010 by admin in InstallationsTags: Carbon Fiber, EVO, EVO 10, EVO-X, Rear Diffuser
June 13, 2008
We have completed test fitment of the brand new EVO X Carbon Fiber Rear Bumper Diffuser manufactured by Racing Elegance. The installation is pretty straightforward and takes about an hour to complete. Take a look at the photos and “how-to” below to see what is involved in installing this product on your Lancer [...]
EVO-X Agency Power Cold Air Intake Installation
Posted: 29th April 2010 by admin in InstallationsTags: Agency Power, Cold Air Intake, EVO, EVO 10, EVO-X, EVO-X Intake
June 9, 2008
Product: 08+ Mitsubishi Evolution-X Short Ram Air Intake by Agency Power
Today we installed the new air intake system by Agency Power. This intake system consists of a Mass Air Flow Adapter, K&N Filter, and heat shield. The install took about 25 minutes to complete with only basic hand tools necessary. Please check out [...]
EVO-X Carbon Fiber Engine Cover and Cooling Plate Installation
Posted: 29th April 2010 by admin in InstallationsTags: Carbon Fiber Accessories, Engine Cover, Engine Dress Up, EVO 10, EVO-X
May 28, 2008
08+ Mitsubishi Evolution-X Carbon Fiber Engine Cover
Today we recieved the first samples of the new carbon fiber radiator cooling plate and engine cover from Racing Elegance. We were able to install these items in just a couple minutes without any problems whatsoever. The radiator plate took less than 2 minutes to install. Only [...]
EVO-X Megan Racing Coil Over Damper Kit Installation
Posted: 28th April 2010 by admin in InstallationsTags: Coilovers, Damper Kit, EVO 10, EVO- X Suspension, EVO-X, Install, Megan Racing
We have completed the installation and testing of the new 32 Way Adjustable Damper Coil Over Suspension Kit by Megan Racing.
Product: 08+ Mitsubishi EVO-X Megan Racing 32way Adjustable Coil Over Kit
The kit was a fairly easy installation taking about 2 hours with basic hand tools without the use of a lift. The kit gives you [...]