Product: 08-10 Mitsubishi EVO-X Illuzion Body Kit
We have been working hard on our EVO-X GSR this week fitting lots of new carbon fiber parts. We just completed installation of the new Illuzion body kit which we had custom built in full carbon fiber for our vehicle and did a photo shoot to share with all [...]
Posts Tagged ‘EVO’
08-10 Mitsubishi EVO-X Illuzion Body Kit Installed
Posted: 11th May 2010 by admin in New ProductsTags: Black Illusion Body Kit, EVO, EVO 10, EVO-X, EVO-X Body Kit, Illuzion Body Kit
0
EVO-X Duck Bill Trunk Installed Photos
Posted: 11th May 2010 by admin in New ProductsTags: Carbon Fiber, Carbon Fiber Trunk Lid, Do Luck Style, Duck Bill Trunk, EVO, EVO 10, EVO-X
Product: 08-10 Mitsubishi EVO-X DL-Style Duck Bill Carbon Fiber Trunk
This is the best fitting trunk we have test fitted here at Driven By Style LLC and used this trunk lid on our personal project car for www.evoxtuning.com
Installation is straight forward with no modifications at all needed. You simply unbolt the factory trunk lid and swap [...]
EVO-X Carbon Fiber Fenders Installation
Posted: 10th May 2010 by admin in InstallationsTags: Carbon Fiber, EVO, EVO 10, EVO-X, Fenders, Installations
June 13, 2008
Product: 08+ Mitsubishi Evolution-X Carbon Fiber Fenders (Pair)
We have completed test fitment on the new 2008+ Mitsubishi EVO-X Carbon Fiber Fenders by Racing Elegance. We have photographed the installation process to share with our readers and customers so they can see what is involved in installing this product on an EVO X.
Tools Needed: 10mm [...]
EVO-X ETS Intercooler Kit Upgrade Install
Posted: 10th May 2010 by admin in InstallationsTags: ETS, EVO, EVO 10, EVO-X, EVO-X Intercooler, Extreme Turbo Sysytems, Installs, Intercooler, Intercooler Pipes
July 13, 2008
Product: 08+ Mitsubishi Evolution-X ETS Intercooler Upgrade Kit
ETS Intercooler and piping upgrade installation.
Before you are ready to start installing the new parts you will want to lay out your new parts on a blanket or work table so that you can inventory all of the components that make up the kit. (Our pictures [...]
EVO-X Agency Power Suction Pipe Install
Posted: 29th April 2010 by admin in InstallationsTags: Agency Power, EVO, EVO 10, EVO-X, Suction Pipe, Turbo Inlet Pipe
July 2, 2008
Product: 08+ Mitsubishi Evolution-X Agency Power Turbo Suction Pipe Kit
We installed the first suction pipe we received from Agency Power today and are pleased with the fitment, product quality, and finished result. This pipe works in conjunction with the Agency Power Air Intake Kit by replacing the stock rubber tube connecting the mass [...]
EVO-X Carbon Fiber Rear Bumper Diffuser Installation
Posted: 29th April 2010 by admin in InstallationsTags: Carbon Fiber, EVO, EVO 10, EVO-X, Rear Diffuser
June 13, 2008
We have completed test fitment of the brand new EVO X Carbon Fiber Rear Bumper Diffuser manufactured by Racing Elegance. The installation is pretty straightforward and takes about an hour to complete. Take a look at the photos and “how-to” below to see what is involved in installing this product on your Lancer [...]
EVO-X Agency Power Cold Air Intake Installation
Posted: 29th April 2010 by admin in InstallationsTags: Agency Power, Cold Air Intake, EVO, EVO 10, EVO-X, EVO-X Intake
June 9, 2008
Product: 08+ Mitsubishi Evolution-X Short Ram Air Intake by Agency Power
Today we installed the new air intake system by Agency Power. This intake system consists of a Mass Air Flow Adapter, K&N Filter, and heat shield. The install took about 25 minutes to complete with only basic hand tools necessary. Please check out [...]